Blocks with dark and light sides to them

[Antimidation 21]

Would it be possible to label the sides of the blocks with a D and an L to indicate dark and light sides in build mode? Certain blocks have these light and dark sides..... after placement these indicators would obviously not be visible. Thank you.

Edited November 26, 2018 by Antimidation

[foilhat 0]

Or get rid of the transparency on "to place" blocks.  Just highlighting the edges should be plenty enough info.

[Ane 1213]

Couldn't it be because of the light reflected off the block (depending on the position of the sun)?

[Fompster 141]

It happened to me too, it took me ages to find out that it was actually the orientation of the blocks that was causing the color change. It seems to mostly be the plastic blocks but it was also like that before the update.

In the picture are two completely white plastic blocks with different orientation

[Spyler.X 625]

That happens in most blocks. normally the difference in hue is between the bottom and the top

[Antimidation 21]

3 hours ago, Ane said:

Couldn't it be because of the light reflected off the block (depending on the position of the sun)?

This has been an issue for a while. No, it's not the light and shadow side of the block...it's not lighting effects. There's clearly a dark and light side. Also, even if it's the "back" and the "front" of a block, why not label it so while in build mode? That way we can align the dark/light sides correctly.

[Antimidation 21]

1 hour ago, spyler.1989 said:

That happens in most blocks. normally the difference in hue is between the bottom and the top

Right, so label it "Light/dark" or "Bottom" Top" Something that tells us which is which, in build mode it's hard to make out the texture or the slight color variation until it's placed.